Paving your backyard with a new concrete surface can be done for a number of reasons. It could be to create a new pool that you don’t have enough room in your backyard for, or it could be because of a large storm that took out your existing concrete slab. No matter what the reason, there are a variety of methods to resurface your pool. These methods include: Installing an epoxy coating, adding liner to the concrete, or using a chemical solution. Here are some of the more common ways that you can use pool resurfacing to give your pool a whole new look. Click Here –

Pool resurfacing

There are two main types of pool resurfacing that you can use. The most common is to just replace the existing concrete slab with a new one. The second method is to use a chemical peel-and-prime, which involves peeling away the top layer of the concrete, and then applying a protective layer that is made of a special polymer to give the surface a smooth, even finish. The third method is to use a cement board that is painted with a polyurethane coating. You should do some research on how to do a chemical peel-and-prime yourself before you hire a contractor. The last method is usually used by contractors who have never worked on concrete before.

Before you choose a good quality pool resurfacing contractor, take some time to look at some of their previous work. Be sure that they are trained in all areas of pool resurfacing, and that they can give you recommendations for the best products. Also look for a pool service company that has been in business for at least five years. Make sure that they have an inspection report from a national pool association.

Leave a Reply

Your email address will not be published. Required fields are marked *